Extends the life of the lamps without using extra energy
Works well with motion detectors and frequent on-off cycles
T5 Bulbs Emits More Light per Lamp – 1 T5HO Lamp Equals 2 T8 Lamps
Reduces the number of lamps required to light an area
Potentially fewer ballasts required
Less lamps to purchase
Half the number of lamps to recycle at end of life
T5 Lighting has 85 CRI Which is Very High Color Rendering
Superior color rendering of products and surroundings
17% better than standard T8 and 37% better than T12
T5 has the Highest Efficacy and Loves Warm Locations
T5 emits 83+ lumens per watt at 95 degrees
T8 is most efficient at 77 degrees and loses efficacy at higher temps
Lamps located by the ceiling are typically operating at higher temps
Demand for energy savings has brought T5 lighting to the forefront of the market. Customers with warehouses, light manufacturing facilities, and more are replacing old style Probe Start Metal Halides and Mercury Vapor fixtures with T5 light fixtures. The T5 fixtures use a fraction of the power of the old Probe Start Metal Halide. Additionally, when fitted with a programmed start ballast the fixtures can have an occupancy sensor and the on/off feature will not reduce the operating life of the lamps. In virtually all cases the switch to T5 lighting will reduce energy use expenses by thousands of dollars a year and pay for the new fixtures a matter of months. Also, frequently there are demand supply management rebates from electric companies for switching energy efficient T5 fixtures. Click this link for incentives in your state.
T5 lamps produce light by activating selected phosphors on the inner surface of the bulb with ultraviolet energy, which is generated by a mercury arc. Because of the characteristics of a gaseous arc, a ballast is needed to start and operate fluorescent lamps. The advantages of the T5 fluorescent light source include improved efficacy and longer life than incandescent lamps. Efficacy for T5 fluorescent lamps ranges from 85 to 90 lumens per watt. Their low surface brightness and heat generation make them ideal for offices and schools where thermal and visual comfort is considered important.
The disadvantages of T5 lighting are minor but include their large size relative to the amount of light produced. Controlling the light is more difficult too. The light floods or washes and area which results in a diffuse, shadow-less environment. The use of T5 lighting outdoors areas is somewhat less economical because light output of a fluorescent source is reduced at lower ambient temperatures. This is more relevant in very northern parts of the US.
Looking for lots of light from an efficient fixture? Try our 6 lamp T5 high bay fixture. This linear fluorescent fixture is a great energy saving alternative to traditional HID high-bay fixtures and achieves exceptional color rendering. This high bay operates six long life lamps and as a standard feature comes equipped with ballasts. Lots of add on options are also available on our website. These fixtures system tested, designed, approved, and manufactured in USA.
"Customer service was extremely helpful! Everything was just wonderful." Stacy, Toms River, NJ
"Good and fast service." David, Oklahoma City, OK
"Completely pleased with results." Tower of Quayside, Key Biscayne, FL
"Good prices and relatively fast turnaround on products." Chuck, Lugoff, SC
"I received what I ordered on a timely matter." EconoLodge Oceanfront, Virginia Beach, VA
"Very satisfied with customer service, product availability, and shipping." Clarion County Housing Authority, Clarion, PA
"Excellent service. Very helpful advice." Bob, Estill Springs, TN
"Quality product and good service." John, Fort Dodge, IA
"Good products and service." Perelco, Inc., Montgomery, AL
"Great customer service." Razors, Bridgeport, WV
"The fixtures look good and so far have performed as promised." All Automation Technologies, Inc., Athens, GA
"Good turn around time." VW International Inc, Alexandria, VA