EPTA 60 No UV – No Light Below 450nm Linear LED Light – 120-277v


  • No UV – LEDs generate no UV or light under 450nm: no filters, no filter failures
  • Broadest spectrum of light possible for outstanding working conditions
  • Flicker-free
  • 3,965 lumens
  • Bracket mount (2+ modules only) or suspension cables mountControls-ready
  • Long 50,000-hour L70 life
  • IP67 rated for clean rooms

For more information select the description tab below or call an Access Fixtures lighting specialist at 800-468-9925

In Stock

SKU: AF72XBCA60-NoUV Categories: , Tag:

Product Description

EPTA 60 No UV - No Light Below 450nm Linear LED Light - 120-277v dimensions

EPTA 60 No UV – No UV Linear LED Light emits no UV while providing more and better light than any previous No UV technologies.

The EPTA 60 No UV – No Light Below 450nm Linear LED Light – 120-277v employs precision-designed LEDs to emit no UV and no light under 450nm. Because absolutely no UV is generated, there’s no need for filters or lenses, and no danger of filter failure and accidental UV contamination. Each EPTA 30 emits 3,965 flicker-free lumens. The unique chip configuration provides the broadest possible spectrum of light resulting in exceptional visibility and superior working conditions.

EPTA 60 No UV – No Light Below 450nm Linear LED Light – 120-277v

  • No UV: Dedicated LEDs don’t emit UV or light under 450nm; No filters to break down.
  • Broadest spectrum possible: Superior visibility; Happier workforce.
  • Flicker-Free: Flickering lights suck
  • High lumens: meet corporate and OSHA-required level of illumination
  • Surface mount (knuckle mount) or pendant mount.
  • Built ready for controls: Ready for 0-10v dimming, occupancy sensors & DALI; Handles unlimited on/off cycles; Ready to meet CA Title 24 requirements.
  • 50,000-hour L70 life: Long life and virtually no maintenance
  • Modular design: Modular design makes for simple repair if needed
  • IP67: Ready for clean rooms; Built so well it is submersible
  • No UV Ever

IP67 Waterproof Dust-Proof Construction

With an IP67 rating, the EPTA 60 No UV Linear LED Light is an excellent choice for clean rooms and critical production facilities. It’s impervious to dust and jets of water during washdowns. This die-cast aluminum housing do not collect dust like traditional No UV fixtures will. The modular LED design means easy repair if ever necessary. It boasts a long 50,000-hour L70-rated life for years and years of low-maintenance lighting.

EPTA 60 No UV – No Light Below 450nm Linear LED Light Configurations and Mounting

The EPTA 60 No UV – No Light Below 450nm Linear LED Light is designed for either individual installation or in an end-to-end series installation. For series installation, please speak to an Access Fixtures lighting specialist at 800-468-9925 to order your custom configuration.

The EPTA 60 Linear LED Fixture 120-277v comes with your choice of mounting options.

The bracket mount comes with two brackets (one on either end of the fixture) and allows you to secure the EPTA to almost any surface. With the bracket mount, you can tilt the EPTA and lock it in place to direct the light where you need it. If you’d like to hang your EPTA fixtures from a ceiling, select the Wire Mount with an adjustable 10′ suspension cables mount. Finally, the Knuckle Mount option mounts on a junction box. Ask an Access Fixtures lighting specialist for more information about these options.

With the remarkable lumens-per-foot ratio of these fixtures, more ceiling space is available for HVAC, plumbing, and other applications.

Access Fixtures 5-Year Warranty

EPTA fixtures come with 5-year warranties. If your product is found to have a manufacturing defect, we will replace components, the entire product, or issue a refund. We stand behind the quality of our products. Our customer service team, located in Worcester, MA, is happy to help with before- or after-sale questions and address your concerns. If you have any questions, give us a call at 800-468-9925.

Need a Photometric Analysis for Your Project?

A photometric analysis creates a computer simulation of a particular project. No matter what you are lighting, a photometric analysis is an easy way to quantify your light levels before making a purchase. This service will provide average footcandles at various heights, max/min (uniformity) ratios, minimum footcandles, light trespass levels, and more. When a report is generated, a lighting specialist will walk you through it, page by page, so you know exactly what you will be receiving. Call us at 800-468-9925 for more information about ordering a photometric analysis for your project.

Ready to Order EPTA 60 No UV – No Light Below 450nm Linear LED Light or Speak to a Lighting Specialist?

You can place your order online, here. Or, if you want additional information, give us a call at 800-468-9925. Does your project require multiple fixtures? Ask us about quantity discounts. Our team of friendly expert lighting specialists is available to provide what you need to purchase fixtures and illuminate your project with confidence.


Weight 6 lbs
Dimensions 22.28 × 3.17 × 3.45 in

Typically ships in 6-8 weeks.

Available Finishes

Black, Gray


530mA Driver


Extruded aluminum housing, Finish meets 1000-hour salt-spray certification per ASTM B117/ ISO 9227:2012

Light Source

Light Source Included

LED Array Included

Light Source Lumens



CSA – listed for wet Locations, IP67, ETL Listed, RoHS, UL Listed


1/2" NPS knuckle mount, Adjustable 10' Suspension Cables, Swivel Bracket

Rated Life

50,000 Hours

System Watts





5-Year Limited Warranty