CARA 81w 590nm Amber LED Area Light, 120-277v, Extreme Life

$459.87

The die-cast aluminum CARA 81w Turtle LED Light Area Light 120-277v emits 2,607 lumens. Its amber 585-595 nanometer wavelength light complies with coastal lighting regulations and security lighting requirements. Energy-efficient LEDs are rated for 50,000 hours. The fixture has an IP66 rating. Options include prismatic lens, a variety of mounting configurations, custom RAL colors, and more. (Photocell not available with Wall Mount Configuration).

 


Buy American Act Compliant

In Stock

SKU: AF33XKH25QF1X81UAM Category: Tags: , , , , ,
   

Product Description

The CARA 81w turtle LED light emits 2,607 lumens. It operates at 585-595 nanometer light, ideal for both turtle-friendly compliance and security systems that require monochromatic amber light. Typical applications include new or HID replacement lighting for retail centers, campuses, medical facilities, office buildings, and industrial parks. This energy-efficient fixture comes with a practical variety of mounting options.

CARA 81w Turtle LED Light LED, Lens, and Performance

The 81w LED array emits 2,607 lumens. The LED is custom engineered specifically for the fixture in order to optimize heat dissipation. It uses a 100% aluminum board with copper tracings to increase the fixture’s lifespan while minimizing lumen depreciation.

Electronic 1-10v dimmable drivers are standard on all of these fixtures and can be easily accessed. Control options include 3-pin photocell receptacle.

The lens is essential to the ingress protection; robotically applied gaskets create a consistent seal and assure the fixture achieves its IP66 rating. A high-quality glass lens is standard and provides maximum light output. Choose the prismatic lens option for a refractor-type effect that diffuses and distributes the light with minimal light loss. Learn more about Access Fixtures Prismatic Lenses vs. Clear Glass Lenses.

CARA 81w Turtle LED Light Housing and Mounting

The CARA 81w turtle LED light’s slimline housing is an essential part of the IP66 seal, while also containing the fixture’s LED heat sink.

The fixture housing and door frame are both die-cast aluminum, 100% copper-free A360 (LM6) alloy from ingot, with no recycled content. Screws mount from the top for clean architectural finish. The nickel-plated stainless steel hardware eliminates seizing.

The fixturemeasures 15″ x 13.38″ x 3.63″ and it weighs 15 lbs. The overall length of the fixture with specific mounting options, is below:

  • Direct Square Mounting Arm (AF33XKH25A) – 27½” (699 mm)
  • Slip Fitter Mount for 2 3/8″ Tenon (AF33XFL73SFX) – 18¾” (476 mm)
  • Steel Yoke Mount (AF33XKH25Y) – 18″ (457mm)
  • Two-Piece Swivel Bracket (AF33XFL73BR) – 18¾” (476 mm)
  • Easy-Hang Wall Bracket (AF33XKHEH) – 16″ (406 mm) – Photocell option not availble with wall mount configuration

Choose mounting heights from 10 to 15 feet to provide ideal light levels and uniformity readings. Call us today to discuss the lighting for your project. Our team will also help you navigate the tricky territory of EPA ratings, wind loads, weight restrictions, and more. If you have exacting lighting requirements, please request  a photometric report for your layout.  For more details about this service, call an Access Fixtures lighting specialist at 800-468-9925.

Ratings, Listing, Features for CARA 81w Turtle LED Light

CARA 81w Turtle and Wildlife Friendly Area Light 120-277v – comes with:

  • Electronic driver, 120-277V, 50/60Hz; dimmable driver
  • CSA: Listed for Wet Locations, ANSI/UL 1598, 8750
  • Lens sealed to an IP66 rating: protected from dust and against heavy seas or powerful jets of water.
  • Warranty to operate at temperatures of -40°F to 122°F
  • Automatically detects voltages between 120v and 277v

Options for CARA 81w Turtle and Wildlife Friendly Area Light 120-277v

Energy-efficient amber CARA 81w turtle LED light will upgrade your outdoor lighting and save on energy costs, and at the same time support turtles and other wildlife. It is easy to customize your fixture to the most exacting requirements. Options include:

  • Clear, flat, prismatic glass lens
  • Custom mounts including Direct Square Mounting Arm, Slip Fitter Mount for 2 3/8″ Tenon, Steel Yoke Mount, Two-Piece Swivel Bracket, or Easy-Hang Wall Bracket
  • Surge protection safeguards fixtures from lightning strikes and other sudden jolts of electricity
  • Custom RAL color to coordinate area lights with to your environment or brand
  • 3-pin twist-lock photocell receptacle

Please contact Access Fixtures for information about motion sensors for this fixture.

Warranty Information

The CARA 81w Turtle and Wildlife Friendly Area Light 120-277v  fixture comes with 5-year warranty.

Ready to Order CARA 81w Turtle LED Light? Call Us Today!

For more details or to discuss custom options for your unique location, speak with an Access Fixtures lighting specialist today at 800-468-9925.

Specifications

Weight 15 lbs
Dimensions 15 × 13.38 × 3.63 in
Availability

Typically ships in 2-4 weeks

Available Finishes

Bronze, Custom RAL

Ballast/Driver

Electronic 50/60 Hz

Features

Wildlife Friendly

Housing

Die-cast aluminum housing and nickel-plated, stainless steel hardware

Lens

Clear tempered glass lens

Light Source

Light Source Included

LED Array Included

Light Source Lumens

2607

Listings

CSA – listed for wet Locations, IP66

Mounting

Direct Square Mounting Arm, Easy-hang wall bracket, Slip Fitter, Two-Piece Swivel Bracket, Yoke Mount/U-Bracket Mount

Rated Life

50,000+ Hours

System Watts

81

Voltage

120-277v

Warranty

5-Year Limited Warranty

Product Family

CARA