FLAT 120 No UV – No Light Below 450nm LED Troffer Light Features and Benefits
- No UV: Dedicated LEDs don’t emit UV or light under 450nm; No filters to break down
- High lumens: meets corporate and OSHA-required level of illumination
- Maximize ceiling space: More ceiling space for HVAC and other purposes;
- Boadest spectrum possible: Superior visibility; Happier workforce
- Built ready for controls: Ready for 0-10v dimming, occupancy sensors & DALI; Handles unlimited on/off cycles; Ready to meet CA Title 24 requirements
- Leading edge diffuser: Even light distribution and low to no glare
- 50,000-hour L70 life: Long life and virtually no maintenance
- Modular design: Modular design makes for simple repair if needed
- Flicker-Free: Flickering lights suck
- IP67: Ready for clean rooms; Built so well it is submersible
No UV Ever
The FLAT 120 No UV – No Light Below 450nm LED Troffer Light – 120-277v employs LEDs precision-designed to emit no UV and no light under 450nm. Without UV, there’s no need for filters or lenses, and no danger of filter failure and accidental UV contamination. Each FLAT 120 emits 7,150 flicker-free lumens, at least double the light per square foot when compared to T8 troffers. The unique chip configuration provides the broadest possible spectrum of light resulting in exceptional visibility and superior working conditions.
IP67 Waterproof Construction
With an IP67 rating, the FLAT 120 No UV LED Troffer Light is an excellent choice for clean rooms and critical production facilities. It’s impervious to jets of water and dust. This die-cast aluminum housing do not collect dust like traditional fluorescent T8 gold tube fixtures will. Modular LED design means easy repair if ever necessary. It boasts a long 50,000-hour L70-rated life for years and years of low-maintenance lighting.
Ready for Gridded Ceiling Installation
The FLAT 120 No UV – No Light Below 450nm LED Troffer Light – 120-277v houses a rugged die-cast luminaire unit in a heavy-duty aluminum troffer panel. The 2’ x 2’ panels drop into clean rooms and production facilities ceilings without disrupting air pressure or contaminating the surrounding area. Better yet, the exceptional lumens-per-foot ratio of these fixtures allows more ceiling space for other applications such as HVAC and plumbing.
Important note: Due to significant weight, FLAT 120 No UV – No Light Below 450nm LED Troffer Light must be installed only in commercial-grade grid ceilings designed to support 34+ pound luminaires.
Access Fixtures 5-Year Warranty
FLAT fixtures come with 5-year warranties. If your product is found to have a manufacturing defect, we will replace components, the entire product, or issue a refund. We stand behind the quality of our products. Our customer service team, located in Worcester, MA, is happy to help with before- or after-sale questions and address your concerns. If you have any questions, give us a call at 800-468-9925.
Need a Photometric Analysis for Your Project?
A photometric analysis creates a computer simulation of a particular project. No matter what you are lighting, a photometric analysis is an easy way to quantify your light levels before making a purchase. This service will provide average footcandles at various heights, max/min (uniformity) ratios, minimum footcandles, light trespass levels, and more. When a report is generated, a lighting specialist will walk you through it, page by page, so you know exactly what you will be receiving. Call us at 800-468-9925 for more information about ordering a photometric analysis for your project.
Ready to Order FLAT 120 No UV – No Light Below 450nm LED Troffer Light or Speak to a Lighting Specialist?
You can place your order online, here. Or, if you want additional information, give us a call at 800-468-9925. Does your project require multiple fixtures? Ask us about quantity discounts. Our team of friendly expert lighting specialists is available to provide what you need to purchase fixtures and illuminate your project with confidence.