Product DescriptionAPTA 160 LED No UV – No Light Below 450nm High Bay, IP67, 347-480v, long life luminaires represent the latest in LED technology providing broad spectrum visibility without the use of filters. APTA luminaires are designed for clean rooms and manufacturing facilities that need to meet OSHA and corporate required light levels while not emitting any UV or light below 450nm. Rated L70 @ 50,000 hours for long life and IP67 waterproof these energy-efficient luminaires provide flicker-free light and do not contain mercury. With quick shipping and a 5-year warranty, these fixtures are an excellent choice for your clean room or manufacturing facility. To talk with a lighting specialist about these fixtures, please call us at 800-468-9925.
No UV – No Light Under 450nm Emitted Ever
No UV – No Light Under 450nm APTA luminaires are constructed with LEDs that do not emit any light within the UV spectrum or light below 450nm. Historically, UV emission was “blocked” with polyethylene terephthalic (PET) coatings. When the PET coating was used on T8 and T12 fluorescent lamps, the lamps were referred to as gold lamps. The coatings were also used as filters on top of lenses that secure onto or in front of light fixtures. These older methods were good, but the PET coatings were expensive, the light levels were low, and facilities still had to replace lamps quite often. The PET lenses tended to be very fragile, too, making them easy to damage during transit or installation. Any scratches or damage to the PET coatings would prevent the fixtures from doing their job. If a filter was damaged or degraded due to heat, production runs could be effected or lost.
APTA 160 LED No UV – No Light Below 450nm High Bay, IP67, 347-480v luminaires emit no-UV lighting without the need of lenses, filters or PET coatings. In other words, NO FILTERS. No filters means no filter degradation. LEDs that do no emit any UV or light under 450nm ever means consistent, reliable, flicker-free UV-free lighting for the entire lifetime of the fixtures.
No UV – No Light Under 450nm and No Glare
APTA 160 LED No UV – No Light Below 450nm High Bay, IP67, 347-480v luminaires have an optical diffuser which blends the light emitted by the LEDs creating a soft-focus, no-glare effect. The result is extremely even and cohesive light distribution.
Die Cast Housings, ASTM B117 and ISO 9227-2012 Rated Finish, IP67 Sealed, and Safety Listing
APTA 160 LED No UV – No Light Below 450nm High Bay, IP67, 347-480v luminaires start with die-cast aluminum housings. The housings are finished in an ASTM B117 rated corrosion-resistant polyester powder coating. The luminaires are IP67 rated too, which means they are dust-proof and weatherproof. They can even be immersed in water for a short amount of time. In addition to the IP rating, the luminaires are cUL, RoHS, and UL listed.
Choice of Mounting
APTA 160 LED No UV – No Light Below 450nm High Bay, IP67, 347-480v luminaires have a multiple mounting options. The U-bracket mount provides easy wall or ceiling surface mounting and the ability to direct the light where it is needed . The canopy mount option provides a close to ceiling mount option with a break-away feature for easy installation. Also available are eye hooks for suspension mounts on aircraft wire, pendant mounts and a hook mount.
Need a Photometric Analysis for Your Project?
A photometric analysis is a computer simulation of how specified lighting will illuminate a facility, providing information such as how many footcandles of light will be emitted on the work surface and how even the lighting will be. .Consider getting a photometric study to ensure the light levels your facility requires are delivered. For more details, see Access Fixtures Photometric Simulate Proposed Lighting Solutions.
Access Fixtures 5-Year Warranty
APTA 160 LED No UV – No Light Below 450nm High Bay, IP67, 347-480v luminaires come with five-year warranties. Our customer service team located in Worcester, MA, is always here to help address any after-sale questions or concerns. If your product is found to have a manufacturing defect, we will either replace components, the entire product, or issue a refund. We stand behind the quality of our products and pride ourselves in expert and friendly customer service.
Ready to Order?
You can place your order online or by calling an Access Fixtures lighting specialist. If you need additional information call an Access Fixtures lighting specialist. 800-468-9925.