South Brunswick, NJ Adopts Residential Outdoor Lighting Ordinance Targeting Floodlights, Light Trespass, and Glare
By Access Fixtures Lighting Specialists·Dark Sky Ordinances and Policy·November 2026
What Ordinance 2026-16 Covers
The township's notice describes the ordinance as supplementing Chapter 42 (Environment) of the Township Code to establish standards for residential outdoor lighting and to regulate floodlights, light trespass, and glare. Because it targets residential lighting, the fixtures most likely to be affected are the ones homeowners and small contractors install most often: garage and driveway floodlights, wall-mounted fixtures, and yard lighting.
We have not summarized numeric limits, such as maximum lumens, mounting heights, or hours of operation, because the notice we reviewed does not state them. Request the full ordinance text from the Township Clerk before you specify or install.
Why Floodlights Draw Regulation
A floodlight is designed to throw a wide beam. Mounted on a garage or eave and aimed outward, it lights the driveway and often the neighbor's yard, windows, and the street. That spill is light trespass, and the bright source against a dark background creates glare for anyone looking toward it. Our guide to light trespass laws explains how trespass is measured and how to fix it on an existing fixture.
Before You Install: Four Checks
- Get the text. Request Ordinance 2026-16 from the Township Clerk and confirm the effective date.
- Shield and aim down. Choose fully shielded, downward-aimed fixtures, such as full-cutoff wall packs, in place of open floodlights.
- Warm the color. Specify 3000K or lower, the range Maine and Provo, Utah have written into their rules.
- Limit the hours. Add a photocell, timer, or motion sensor so the light runs only when someone needs it. See our lighting controls guide.
Fixing Floodlights That Are Already Installed
Work in this order, starting with the least costly fix: re-aim the fixture, add a house-side or backlight shield, then change the optic or the controls. A photometric study from an Access Fixtures lighting engineer shows where the light lands before and after, so you can document the result.
Where Residential Lighting Rules Are Heading
South Brunswick joins a growing list of US jurisdictions writing lighting standards into code. Maine's LD 1934 sets numeric limits for public lighting. Illinois' SB 3037 integrated ANSI/IES standards into optional municipal stretch codes. Provo, Utah adopted updated standards, and Washoe County, Nevada is drafting new rules for unincorporated areas. Each takes a different route, and each asks the same question of a fixture: where does the light go?
Source: Township of South Brunswick, Ordinance 2026-16 notice (adopted October 21, 2026). The effective date is calculated from the notice's 20-day period; confirm it with the Township Clerk.
Access Fixtures Solutions
Full-Cutoff Wall Packs
Shielded wall packs that replace open garage and driveway floodlights with downward-directed light.
Shop Wall Pack Lights →Area and Flood Lighting
Controlled-optic area luminaires for yards and driveways, aimed to keep light on the property.
View Area Lighting →3000K Warm-Spectrum Fixtures
3000K and below LEDs, the color range Maine and Provo have adopted.
Shop 3000K Fixtures →Photometric Studies
Document light levels and spill at the property line before you install.
Request a Photometric Study →Specify Floodlights That Stay on Your Property
Our lighting specialists help contractors, electricians, and homeowners specify fully shielded, warm-spectrum fixtures and document that light stays on the property. Contact us to get started. Call 800-468-9925 or request a photometric study online.
800-468-9925
