Utility Streetlights and Light Pollution: A Town's Guide
Dark Sky Ordinances and Policy

Utility Streetlights and Light Pollution: What Your Town Can Ask For

By Access Fixtures Lighting Specialists·Dark Sky Ordinances and Policy·November 2026

Short answer: When a utility owns your streetlights, your town picks from the utility's fixture list. You can still get dark sky friendly results. Ask the utility three questions, update your lighting ordinance, and light the sites your town owns the right way. Princeton, New Jersey shows why this matters now. On November 11, 2026, The Daily Princetonian reported that a councilmember said PSE&G limits New Jersey municipalities to an approved fixture catalog. Residents had complained of brightness and glare from new LED fixtures on two streets. The Council expects a suggested resolution at its November 23 meeting.

Why Utility Streetlights Become a Light Pollution Problem

LED streetlight on a small New England town street at night

Many towns do not own the streetlights on their roads. A utility owns, installs, and maintains them, and the town pays for the service. That arrangement saves the town maintenance work. It also means the town chooses from the fixtures the utility offers, not from the whole market.

LED conversions bring the issue to the surface. In Princeton, the Environmental Commission named two causes of local light pollution: LEDs that are brighter and cooler in color than the lamps they replaced, and unshielded outdoor fixtures. Professor Gaspar Bakos, who has monitored local light pollution for 15 years, said the installed fixtures cannot be dimmed. His fix is shielding.

The utility's position matters too. A PSE&G spokesperson told the paper that its LED options include fixtures designed to limit upward-directed light, including full-cutoff options. The gap is between what a catalog offers and what a town actually specifies.

How fixture decisions flow when a utility owns the streetlights Two paths. Top: a town ordinance and the utility's fixture catalog determine the streetlight on a town road, which the utility owns and maintains. Bottom: for sites the town owns, such as parks and parking lots, the town chooses the fixture from the whole market. Who decides the fixture? Your town ordinance Shielding, color temperature, hours Utility fixture catalog The town picks from the utility's approved list Streetlight on your road Owned and maintained by the utility Sites your town owns Parks, lots, yards, town hall grounds Fixture your town chooses Full market available Ask the utility three questions, update the ordinance, and choose the fixture where the town owns the site.
Illustration. Where a utility owns the lights, the town's levers are its ordinance and the questions it asks.

Three Questions to Ask Your Utility

  1. Which fixtures in your catalog are full cutoff, with no light above horizontal? Ask for the BUG rating (backlight, uplight, glare) of each option. An uplight rating of zero is the target.
  2. Which color temperatures can you supply? Many dark sky friendly ordinances set a warm limit, often 3000K or below. Ask whether warmer options or 590nm amber are available near habitat.
  3. Can the fixtures dim, or switch by schedule or motion? Princeton's Commission recommended dimming, timers, and motion sensors. If the catalog fixtures cannot dim, ask what it takes to add controls.

Put the questions in writing. Princeton was advised to write to PSE&G and copy the head of the state Board of Public Utilities. Your town attorney can confirm the right recipients in your state.

Update the Ordinance That Sets the Standard

A utility can only meet a standard your town has written down. Princeton's lighting ordinance dates from 1997, before LED street lighting was common, and the Environmental Commission asked the Council to update it. An updated ordinance should address three things: shielding, color temperature, and hours of operation. Our guide to tightening municipal dark sky ordinances walks through each one, and Maine's LD 1934 shows what numeric limits look like in a statute.

Watch the State Bills

State law is moving too. New Jersey bills S1635, sponsored by Sen. Andrew Zwicker, and A1656, sponsored by Assemblymembers Roy Freiman and Mitchelle Drulis, would limit light pollution in state-funded projects. Assemblymember Drulis said the Assembly passed an earlier version unanimously last session. Princeton's Commission asked the Council to support the legislation.

Light the Sites Your Town Owns

Streetlights are only part of a town's lighting. Parks, municipal parking lots, public works yards, and town hall grounds are usually owned outright. There, your town chooses the fixture.

The APTA area light with 590nm amber LEDs is one option for parks and lots near habitat. It is IP66 and IK10 rated, a photocell is optional, and a microwave motion sensor can control multiple APTA fixtures. For the step-by-step order, see our light pollution mitigation hierarchy, and for schedules see our part-night lighting guide.

Utility LED conversions have drawn pushback elsewhere. In Rockport, Massachusetts, residents rejected a free utility upgrade. Read what Rockport wanted instead.

APTA 590nm amber LED area light at evening
APTA 590nm amber LED area light

Source: Meiya Xiong, “Princeton Council discusses light pollution, increases public records request costs at meeting,” The Daily Princetonian, November 11, 2026. Product facts: APTA product page.

Access Fixtures Solutions

Street LED Lights

Full-cutoff street lights in warm and amber configurations for towns that own their lights.

Shop Street LED Lights →

Parking Lot Lighting

Shielded parking lot luminaires for municipal lots and park entrances.

Shop Parking Lot Lighting →

APTA 590nm Amber Area Light

IP66 and IK10, with an optional photocell and a microwave motion sensor. See the APTA page.

See the APTA Page →

Photometric Studies

Model where light lands on a park, lot, or yard before you buy.

Request a Photometric Study →

Utility Streetlights: Frequently Asked Questions

Who owns the streetlights in my town?

In many towns, an electric utility owns, installs, and maintains the streetlights, and the town pays for the service. Other towns own their streetlights outright. Your public works department or your utility bill will show which arrangement applies.

Can my town choose any streetlight fixture if the utility owns the lights?

Usually not. When the utility owns the lights, the town typically chooses from the utility's approved fixture list. In Princeton, New Jersey, a councilmember said PSE&G limits municipal customers to an approved catalog (The Daily Princetonian, November 11, 2026).

What makes a streetlight dark sky friendly?

A dark sky friendly streetlight is fully shielded so no light goes above horizontal, uses a warm color temperature, and puts light only where it is needed. Dimming, timers, and motion sensors reduce light further during low-use hours.

Why do new LED streetlights cause glare complaints?

New LEDs are often brighter and cooler in color than the lamps they replace. Unshielded or poorly aimed fixtures send that light into eyes and windows. Princeton residents reported brightness and blinding glare after new LED fixtures were installed on two streets.

What should a town ask its utility before an LED streetlight conversion?

Ask three questions in writing: which catalog fixtures are full cutoff with zero uplight, which color temperatures are available, and whether the fixtures can dim or switch by schedule or motion. Request the BUG rating for each option.

Is there a New Jersey law on light pollution in state-funded projects?

Not yet. Bills S1635 and A1656 would limit light pollution in state-funded projects. As of November 11, 2026, The Daily Princetonian reported they are pending. An earlier version passed the Assembly unanimously last session, according to Assemblymember Mitchelle Drulis.

How can a town reduce light pollution on property it owns?

Start with a photometric study. A lighting engineer models the site and shows where light lands before you buy. Then choose shielded fixtures with a warm color temperature and controls that dim or switch off when areas are empty.

Get the Plan Before the Purchase

A photometric study shows exactly where every fixture puts its light. Request one from an Access Fixtures lighting specialist for your park, parking lot, or municipal site. Call 800-468-9925 or request a photometric study online.

800-468-9925